69CHARGERMD's 1970 Challenger restoration

[roadman5312]

        I really love the way the rear tires fill up the wheel well.   

 

[TelisSE440]

  Those E-Bodies can really take it!

[cordodge]

Somewhat torn as to putting a stripe on it  ,,,,ended up just putting emblems on at this point,,,

Your like myself Doug, I'm not sure about any stripes I was thinking of a red bumble bee stripe the colour of the interior but not sure. I usually not a fan of stripes but keep going back and forth.

Bruce

[69CHARGERMD]

Buddy was nice enough to come to my house and put in the headliner.

[69CHARGERMD]

[69CHARGERMD]

[70HoosierCuda]

Man! That's a good looking driveway!!
Headliner...bow style? How did the install go?

[Challenger in NC]

Car's looking great, wish mine was that far along! I too have wondered what type of wheels to go with. The taller tire looks tough.

[69CHARGERMD]

Hoosier.  Thank you very much, there were five bows that I used, I bought a new headliner.   My friend did most of the work, I helped out as I could. It took approximately three hours to get everything installed including the trim, rearview mirror, visors etc.
 I was very lucky he was able to come to my house and do it as opposed to taking the car to his shop.

Challenger in NC   Thank you, tire size is a 295 65 15.  With a B body Dana, tire fit great, no need for mini tubs.  Definitely not stock but I like the look personally.

Thx guys.

Doug 

[69CHARGERMD]

Got the drip mouldings on. Hope to button up the rest of the side trim soon.

[340challconvert]

Always loved black Challengers and Chargers.
Great looking Mopars

[TelisSE440]

Yes, me too ! Being those two together seems like two cousins !

[69CHARGERMD]

Thanks guys !
I appreciate the comments.

Headliner is officially in...

I put the rear view mirror and visors in.

Installed the Roof-Rail C channels......

Question; i have the new rubber for the roof rail C channels,,,,looks like there is some adhesive to hold the rubber in ?? Is that all there is to it ? Looks like the rubber will fit tight in the channel,,,( and i assume some adhesive will keep it in place ?? )

thx

Doug 

[Rolling_Thunder]

Any progress on the Challenger?         

[timbbuc2]

I am doing a RT Se, on the floor pan picture where is the orange wire going? takes a lot of pictures of wiring, Mine is completely apart.