News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: New member - Upper midwest USA  (Read 1214 times)

    Offline BFM_Cuda

    • Jr. Member
    • **
    • Posts: 217
    New member - Upper midwest USA
    « on: December 10, 2013 - 07:01:40 PM »
    Hi all, I have been browsing the site for a while and figured it was time to put a post in here..

    I am currently working on a 71 Cuda which I have had for about 20 years. I started working on it way back, but it sorta fell by the wayside over the years. Now that decent sheetmetal is being produced, I have gotten back after it and am making good progress. My goal is to have it painted by the end of next summer.
    Its a 383 auto, GB2 color with black vinyl top, two fender tags and I found two build sheets in it. Complete, numbers matching car and I drove it home for $2200 back in 93'. It came with a NOS front valence, lower grille, wheel molding set, and exhaust tips in the trunk, so I think I did ok...  8)
    Really been following Topcats build with interest, hoping mine will be as nice some day!




    A 2010 Challenger R/T followed me home this spring. I figured life's too short to wait until retirement.....

    Logged


    Offline blown motor

    • Resident
    • *****
    • Posts: 3013
    Re: New member - Upper midwest USA
    « Reply #1 on: December 10, 2013 - 07:11:52 PM »
    Welcome. Love the Chally, good luck with the Cuda.
    Logged
    In search of the eternal buzz!

    Offline moparman82

    • MOPAR or No car
    • Resident
    • *****
    • Posts: 2834
    • Livin' the dream
    Re: New member - Upper midwest USA
    « Reply #2 on: December 10, 2013 - 07:35:42 PM »
    Welcome from another mid-westerner!  Where you from?  Love the new chally and that cuda will be sweet!  Can't go wrong with a 71!
    Logged
    Scott in Omaha
    Searching for the right 70 Cuda driver
    1973 challenger in go-mango, on it's way to a 70 T/A clone SOLD
    2015 crew cab Hemi ram SOLD
    2019 Ram Laramie
    2016 Tahoe LTZ SOLD
    1976 Ramcharger 383 4spd SOLD
    2016 Audi

    24 mopars past and 2 present

    Offline dave73chally

    • Sr. Member
    • ****
    • Posts: 1304
    Re: New member - Upper midwest USA
    « Reply #3 on: December 10, 2013 - 07:47:59 PM »
    Nice cars, the cuda looks badass with that "barn fresh" look
    Logged
    73 Challenger
    512 / 4spd / Hotchkis & QA1 Suspension

    Offline hemiken

    • Sr. Resident
    • ******
    • Posts: 8785
    • Hemi-fied Mopar in Australia
    Re: New member - Upper midwest USA
    « Reply #4 on: December 10, 2013 - 10:01:22 PM »
    WELCOME to the site :wave: , great to see another Glacial Blue `Cuda going to be restored back to original colour :jumping: that is awesome :2thumbs:
    Would love to see the codes on your two fender tags if you would not mind posting them up, i will be watching this build  :clapping:
    Logged
    1970 Barracuda   (O^--^===|===^--^O)
    1971 Barracuda   (O O {]{]{]|[}[}[} O O)
    1970 Challenger  (O O [======R/T=] O O)
    1971 Challenger  (O O ===== ===== O O)
    I pay homage to the best Mopars ever built.

    Offline jimynick

    • Resident
    • *****
    • Posts: 4512
    Re: New member - Upper midwest USA
    « Reply #5 on: December 10, 2013 - 10:17:17 PM »
    Welcome to the site and those are two nice cars!  :wave:
    Logged

    Offline BFM_Cuda

    • Jr. Member
    • **
    • Posts: 217
    Re: New member - Upper midwest USA
    « Reply #6 on: December 10, 2013 - 10:27:36 PM »
    Quote from: hemiken on December 10, 2013 - 10:01:22 PM
    Would love to see the codes on your two fender tags if you would not mind posting them up, i will be watching this build  :clapping:

    Sure, I don't mind sharing them... Nothing spectacular but not bad either....
    --------------------------------------

         EN2
         N42 N85 R26 V5X 26
                  BS23 N1B 2#####
    ---------------------------------------
    M21 M25 M31 M88 N41 CTD
         J45 J54 L25 L31 L34
    G11 G31 G33 H31 H51 J25
    V1X   U    A01 A62 B51 C55
    GB2 H6X9 000 C15 003584
    E65 D32 BS23 N1B 2#####   
    ---------------------------------------
    Logged

    Offline Haddixj

    • Full Member
    • ***
    • Posts: 641
    Re: New member - Upper midwest USA
    « Reply #7 on: December 10, 2013 - 11:08:07 PM »
    Nice car! Gotta love a 71
    Logged

    Offline hemiken

    • Sr. Resident
    • ******
    • Posts: 8785
    • Hemi-fied Mopar in Australia
    Re: New member - Upper midwest USA
    « Reply #8 on: December 11, 2013 - 06:19:56 AM »
    Quote from: BFM_Cuda on December 10, 2013 - 10:27:36 PM
    Sure, I don't mind sharing them... Nothing spectacular but not bad either....
    --------------------------------------

         EN2
         N42 N85 R26 V5X 26
                  BS23 N1B 2#####
    ---------------------------------------
    M21 M25 M31 M88 N41 CTD
         J45 J54 L25 L31 L34
    G11 G31 G33 H31 H51 J25
    V1X   U    A01 A62 B51 C55
    GB2 H6X9 000 C15 003584
    E65 D32 BS23 N1B 2#####   
    ---------------------------------------
    Very nice car, you do have some cool options that add up to plenty of options. :2thumbs: Thanks you for sharing :clapping:
    Logged
    1970 Barracuda   (O^--^===|===^--^O)
    1971 Barracuda   (O O {]{]{]|[}[}[} O O)
    1970 Challenger  (O O [======R/T=] O O)
    1971 Challenger  (O O ===== ===== O O)
    I pay homage to the best Mopars ever built.

    Offline anlauto

    • Permanent Resident
    • *******
    • Posts: 12328
    • I'm Alan G...I'm a Mopar Addict
      • Alan Gallant Automotive Restoration
    Re: New member - Upper midwest USA
    « Reply #9 on: December 11, 2013 - 07:29:37 AM »
    WoW...Nice car for sure...love the colour combo, very rare!
    I hope it gets restored back to 100% original...only thing I would consider changing is the column shifter is favor of a console shift....I have an original radio and cassette deck for you if yours is missing...
    Logged
    I've taught you everything you know.....but I haven't taught you everything I know !
    www.alangallantautomotiverestoration.com

    Offline brads70

    • C-C.com Expert
    • ********
    • Posts: 18747
    Re: New member - Upper midwest USA
    « Reply #10 on: December 11, 2013 - 08:42:25 AM »
    Welcome! Nice cars!  :2thumbs:
    Logged
    Brad
    1970 Challenger 451stroker/4L60 auto OD
    Barrie,Ontario,Canada
    Proud to own one of the best cars ever made!!!!!

    My restoration thread 
    http://www.cuda-challenger.com/cc/index.php?topic=59072.0
     My handling upgrade post
    http://www.cuda-challenger.com/cc/index.php?topic=73985.0

    Offline Topcat

    • C-C.com Expert
    • ********
    • Posts: 15376
    • Member since 9/16/04
    Re: New member - Upper midwest USA
    « Reply #11 on: December 11, 2013 - 09:55:05 AM »
    Welcome aboard. What a great project you have.
    Looking forward to seeing it being resto'd.
    Logged
    Mike, Fremont, CA.

    Offline BFM_Cuda

    • Jr. Member
    • **
    • Posts: 217
    Re: New member - Upper midwest USA
    « Reply #12 on: December 12, 2013 - 06:26:16 PM »
    Quote from: anlauto on December 11, 2013 - 07:29:37 AM
    I hope it gets restored back to 100% original...only thing I would consider changing is the column shifter is favor of a console shift....I have an original radio and cassette deck for you if yours is missing...

    Yes, plans are to be very close to stock. Added rear torque boxes already, and I have a set of frame connectors ready to go on in the near future, but that's about it for mods. I have been thinking about the console for a long time, but don't have any parts for the conversion yet. May be time to start looking, but I will save those stories for a resto thread...

    I am missing the cassette deck.....     :worshippy


    Quote from: moparman82 on December 10, 2013 - 07:35:42 PM
    Welcome from another mid-westerner!  Where you from? 

    Hey moparman, I am in North Dakota
    « Last Edit: December 12, 2013 - 06:31:37 PM by BFM_Cuda »
    Logged

    Offline anlauto

    • Permanent Resident
    • *******
    • Posts: 12328
    • I'm Alan G...I'm a Mopar Addict
      • Alan Gallant Automotive Restoration
    Re: New member - Upper midwest USA
    « Reply #13 on: December 12, 2013 - 07:48:51 PM »
    If you're going basically stock, why the frame connectors, torque boxes etc...? :dunno:
    Logged
    I've taught you everything you know.....but I haven't taught you everything I know !
    www.alangallantautomotiverestoration.com

    Offline hemiken

    • Sr. Resident
    • ******
    • Posts: 8785
    • Hemi-fied Mopar in Australia
    Re: New member - Upper midwest USA
    « Reply #14 on: December 14, 2013 - 06:38:41 PM »
     :iagree: I am in to column shift as something different myself, that is what is going in one of my cars in fact, actually leaving it that way. :bigsmile:
    And i too am a big fan of making the car stiffer through the body with stiffeners :2thumbs:
    Logged
    1970 Barracuda   (O^--^===|===^--^O)
    1971 Barracuda   (O O {]{]{]|[}[}[} O O)
    1970 Challenger  (O O [======R/T=] O O)
    1971 Challenger  (O O ===== ===== O O)
    I pay homage to the best Mopars ever built.
    Pages: [1]
    « previous next »