Hi all,
I was in the process of beginning to install the headliner (73 barracuda, 4 bow) - I was curious as to the brace that goes from one side to the other, that the dome light mounts on, is there supposed to be a gap between the brace and the roof, towards the middle?
The brace is still spot welded on each side above the doors, and to my knowledge, has never been fooled with (it's "possible" the headliner that disintegrated years ago was the original) the closer you get to center, the gap gets wider.
It's probably an inch or less at its largest, but you can push up where the light mounts, and it somewhat flexes back up towards the roof, but I don't see any old welds around the center. Does anyone know if that's normal, or has a weld come loose?
Hard to see it in the picture, but that is the general area - and my dumb butt figured glue in the insulation first, and ask questions later
Thanks in advance!