Author Topic: Is this water temp gauge reading properly or low ?  (Read 2321 times)

Offline Racer57

  • Sr. Member
  • ****
  • Posts: 1489
Is this water temp gauge reading properly or low ?
« on: January 10, 2014 - 11:19:42 AM »
70 Cuda
383cu
26" radiator

Is the DASH water temp gauge reading properly or low ?
« Last Edit: January 10, 2014 - 11:24:40 AM by Racer57 »




Offline burdar

  • Sr. Resident
  • ******
  • Posts: 5925
Re: Is this water temp gauge reading properly or low ?
« Reply #1 on: January 10, 2014 - 11:34:17 AM »
I think that's probably OK.  I have a 192 degree stat in my car and the gauge reads just less then half.(rebuilt and calibrated gauges)

Offline HP_Cuda

  • Hit the skinny little pedal on the right!
  • Sr. Resident
  • ******
  • Posts: 5268
  • Mopar or No Car!
Re: Is this water temp gauge reading properly or low ?
« Reply #2 on: January 10, 2014 - 02:19:52 PM »

What temp thermostat you have in your Cuda?
1970 Cuda Clone 440 4 speed - sublime green
1970 Cuda 383 4 speed - yellow - SOLD

Offline Racer57

  • Sr. Member
  • ****
  • Posts: 1489
Re: Is this water temp gauge reading properly or low ?
« Reply #3 on: January 10, 2014 - 02:23:43 PM »
What temp thermostat you have in your Cuda?

160

Offline HP_Cuda

  • Hit the skinny little pedal on the right!
  • Sr. Resident
  • ******
  • Posts: 5268
  • Mopar or No Car!
Re: Is this water temp gauge reading properly or low ?
« Reply #4 on: January 10, 2014 - 02:35:01 PM »

Looks like you are right on the money!

 :2thumbs:
1970 Cuda Clone 440 4 speed - sublime green
1970 Cuda 383 4 speed - yellow - SOLD

Offline MEK-Dangerfield

  • C-C.com Expert
  • ********
  • Posts: 20946
  • I don't get NO respect! Member since 1/25/2002
Re: Is this water temp gauge reading properly or low ?
« Reply #5 on: January 10, 2014 - 05:01:28 PM »
I can't comment on your after market gauge, but that's what I see on my Rally temp. gauge.   :thumbsup:

Mike

1970 Challenger - SOLD
2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.

Offline Katfish

  • Resident
  • *****
  • Posts: 3733
  • 70 Challenger
« Last Edit: January 10, 2014 - 05:25:39 PM by Katfish »

Offline Racer57

  • Sr. Member
  • ****
  • Posts: 1489
Re: Is this water temp gauge reading properly or low ?
« Reply #7 on: January 10, 2014 - 05:33:29 PM »
Thanks for the replies. :clapping:

 I'll sleep a lot better tonight. Between bad gauges and getting a couple wires mixed up, I've had a hellva time putting the new cluster in. I finally got it done and everything works.

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Is this water temp gauge reading properly or low ?
« Reply #8 on: January 10, 2014 - 06:38:44 PM »
 :2thumbs:

Challenger - You`ll wish You Hadn`t

Offline dodj

  • Sr. Resident
  • ******
  • Posts: 6197
Re: Is this water temp gauge reading properly or low ?
« Reply #9 on: January 10, 2014 - 07:50:44 PM »
What temp thermostat you have in your Cuda?
160
Why? Engine was never designed to run a 160* t-stat.
Scott
1973 Challenger  440 4 spd 
2007.5 3500 6.7 Cummins Diesel, Anarchy tuned.
Good friends don't let friends do stupid things. ........alone.

Offline 72cudamaan

  • Resident
  • *****
  • Posts: 3248
Re: Is this water temp gauge reading properly or low ?
« Reply #10 on: January 10, 2014 - 08:24:44 PM »
Why? Engine was never designed to run a 160* t-stat.

  :iagree:  Seems way too cold.
If I cant fix it, it's broke
 
Andy  (phukker whither)

Offline HP_Cuda

  • Hit the skinny little pedal on the right!
  • Sr. Resident
  • ******
  • Posts: 5268
  • Mopar or No Car!
Re: Is this water temp gauge reading properly or low ?
« Reply #11 on: January 10, 2014 - 09:10:37 PM »

The original question was "is my water guage reading properly". The answer is yes.

Now onto the other topic of the best temperature for atomization of fuel the answer is as close to 180-190 as possible which lends itself to a 180 degree thermostat.

There you just got a 2fer!

 :bigsmile:

Why? Engine was never designed to run a 160* t-stat.
1970 Cuda Clone 440 4 speed - sublime green
1970 Cuda 383 4 speed - yellow - SOLD

Offline Racer57

  • Sr. Member
  • ****
  • Posts: 1489
Re: Is this water temp gauge reading properly or low ?
« Reply #12 on: January 10, 2014 - 09:39:42 PM »
Engine had been running too hot this past summer so I put it on hoping it would help.

Offline burdar

  • Sr. Resident
  • ******
  • Posts: 5925
Re: Is this water temp gauge reading properly or low ?
« Reply #13 on: January 13, 2014 - 09:57:09 AM »
The only thing a thermostat does is regulate the lowest possible temp of the engine.  It has nothing to do with overheating as long as it's not stuck closed.

Offline 74 challenge

  • Sr. Member
  • ****
  • Posts: 1247
Re: Is this water temp gauge reading properly or low ?
« Reply #14 on: January 14, 2014 - 08:43:34 AM »
My non-rally guage reads exactly the same but I have a 180 t-stat and an overkill 3 core rad for my 318.
1-8-4-3-6-5-7-2