First crack at it: list of parts (carb, power brake setup, intake)

[HP_Cuda]

Guys

In celebrations of certain events, I will be offering these parts here first before going out to other venues. Ideally I'd like to sell them to folks near me so it will save me the hassle of shipping but I will work with folks if they are serious and want to pay the shipping fee.

Performer 440 intake - nice and clean and ready to go! $130 bucks *SOLD*

Master+booster setup - I could not use this setup because it's meant for a manual car for which folks want to convert to power brakes $110 bucks

These items will be on CC.com for 2 weeks and then I'll move them off to other selling venues!

B

[packnsix]

Im interested in the master + booster. Can you post the brand and model number for both peices? Also, it looks like the box contains additional parts. Can you list everything that comes with it?

[wally426ci]

Please put me in line for the master/booster combo as well. Is that a 2 bolt or 4 bolt master cylinder?

[HP_Cuda]

This is a SSBC kit for changing out an original manual brake car to a power brake car.

It has a 2 bolt master cylinder which connects to the booster - everything is new and painted.

There is a couple of stainless steel lines to hook up the master to the block, as well I can throw in a couple of flexible lines to the calipers with this kit. The kit also includes standoff brackets if you need them. I also have a proportioning valve I will sell with the kit for another $30 bucks and yes it's brand new.

Basically you need to get the calipers, rotors, lines from the block to the calipers and you have a setup!

[packnsix]

This is a SSBC kit for changing out an original manual brake car to a power brake car.

It has a 2 bolt master cylinder which connects to the booster - everything is new and painted.

There is a couple of stainless steel lines to hook up the master to the block, as well I can throw in a couple of flexible lines to the calipers with this kit. The kit also includes standoff brackets if you need them. I also have a proportioningvalve I will sell with the kit for another $30 bucks and yes it's brand new.

Basically you need to get the calipers, rotors, lines from the block to the calipers and you have a setup!

Thanks for the info...I need to do some more research so if Wally would like the parts please go ahead and sale them.

[Jesus H Chrysler]

I'm interested in the intake and maybe the brake setup if no one else grabs it.  Where are you located so I can calculate shipping to MA

[HP_Cuda]

CA zip 95051

I'm interested in the intake and maybe the brake setup if no one else grabs it.  Where are you located so I can calculate shipping to MA