1974 challenger parts car

[brotow]

74's have a small box with a red button (the Seatbelt Override Switch that is unique to this model year) mounted on the driver's side inner fender, near the battery.   If this has one and it is in decent shape, I'm interested.....

thanks
VT Mopar

That was rusted beyond.   You also should check Amc, I remember my friend had a 74 Javelin that had that override.  My 73 Amx does not have it but I will check my 74 Javelin for it. If it has it I'll get a picture or some numbers off it. I bet it would be the same.

[VTMopar]

That's it.... Although it seems to have an extra label on the outside vs an  e body.

[brotow]

That's it.... Although it seems to have an extra label on the outside vs an  e body.

Doesn't look the same, and big $$.

http://www.ebay.com/itm/NOS-MOPAR-1974-SEAT-BELT-INTERLOCK-OVERRIDE-SWITCH-PLYMOUTH-DODGE-CHRYSLER-/231002131545?pt=Vintage_Car_Truck_Parts_Accessories&hash=item35c8cccc59&vxp=mtr

[VTMopar]

Thanks Brotow.    I agree, it doesn't look close....   
I'm good with the one on my car, I just thinking of a "spare" if in nice shape.   



VT Mopar

[daaboots]

Do you have the plastic A pillar interior covers?

[brotow]

Do you have the plastic A pillar interior covers?

I do have them, I will check their condition and take some pictures.

[daaboots]

Do you have the plastic A pillar interior covers?

Thanks. Mine are crumbling and falling apart.

[DMZ73]

Do you still have a spare drivers side plastic splash shield?
Dan


dmz73

[brotow]

Do you still have a spare drivers side plastic splash shield?
Dan


dmz73
[/quote
The plastic piece that is behind the headlight?

[tbone416]

I have a 1974 challenger parts car to strip. Anyone need parts CHEAP. Looking to make more room to work on my 70 chall vert.  Body is pretty much rusty as well the floors. Front buckets, 360 approx 80k miles,  auto trans, front disc,  3 speaker dash,  rally gauges(8K TACH), tail lights. Extra k frame, flat hood(1970 damaged), rally hood(rust sealed) Located in Long Island N.Y.  I can email any pictures of parts you may be interested   WOULD LIKE TO SELL THE 360(less than 80k) WITH OR WITHOUT TRANSMISSION ASAP-NAME YOUR PRICE( I NEED THE MOTOR MOUNTS) in.

do you have the trim from the front of the hood the painted piece!! and a pass side mirror I'm going to paint it!!!

[DMZ73]

In front of the door in the wheel well.


dmz73

[brotow]

Do you have the plastic A pillar interior covers?

Here is a picture and a link to more pictures of the a pillar moldings.  They are in very good shape, not brittle or chalky. The edge that faces the wind shield has faded, they should be dyed to be perfect. There is a "extra" hole on one end of one of the pieces, (close up picture of that piece) shouldn't be seen when installed.  I don't have a price yet because I don't know what they are worth.

http://s1131.photobucket.com/user/brotow1/library/1974%20challenger%20a%20pillar%20mouldings?sort=3&page=1

[brotow]

In front of the door in the wheel well.


dmz73

I looked for them but was unsuccessful.  I'll probably come across them, but I don't want to hold up your search.

[daaboots]

I sent you a PM about the pillar covers.