Work Completed Week Ending 4/17/05

Author Topic: Work Completed Week Ending 4/17/05  (Read 2397 times)

Offline challenger72rt

  • Full Member
  • ***
  • Posts: 675
  • My l'il girl w' Dodge hat
Work Completed Week Ending 4/17/05
« on: April 18, 2005 - 12:10:42 PM »
Well, I finally managed to re-adjust the carb so the Chally will at least start again, altho it is not near full performance.

Finally received the Harms Pistol Grip auto-shifter.  I LOVE IT!!!  Can't stop driving the slap-stik without rowin the gears now.  I CAN'T GET ENUFF OF IT!!!  :burnout:

Oh...and my wife had a baby girl!  7Lbs 15 oz. 21"...our first.   :guitar: :dogpile: :beer: :wasted:

Altho I have been driving the Chally every day since we got home on Thursday, MAN I need sleep!!  :yawn: :sleep:
« Last Edit: April 18, 2005 - 01:05:52 PM by Rev-It-Up »
"Once upon a time I had a really bad Monday"




Offline Rev-It-Up

  • Global Moderator
  • Permanent Resident
  • *****
  • Posts: 10601
  • Member Since 2/20/02
Re: Work completed last week
« Reply #1 on: April 18, 2005 - 12:14:08 PM »
Congratulations!!! How's momma doing?  Do we get to see a little baby pic?? 

We love our Harms pistol grip too.  Feels real heavy.  Really nice workmanship.  What kind of finish did you get on the handle? 
Rev-It-Up                                                             Yes, I'm a girl!
                         


Offline gichy

  • Jr. Member
  • **
  • Posts: 281
Re: Work completed last week
« Reply #2 on: April 18, 2005 - 12:17:01 PM »
Congratulations on the New addition!! :beer:

Here are some pic's on my new fenders from ebay
1974 Barracuda, 340cid, 4 speed OD !!

Offline gichy

  • Jr. Member
  • **
  • Posts: 281
Re: Work completed last week
« Reply #3 on: April 18, 2005 - 12:18:01 PM »
More
1974 Barracuda, 340cid, 4 speed OD !!

Offline Street_Challenged73

  • Sr. Resident
  • ******
  • Posts: 8826
  • '73 FC-7 Challenger..Member since October 20, 2002
    • My '73 Challenger Restoration Page
Re: Work completed last week
« Reply #4 on: April 18, 2005 - 01:03:43 PM »
Challenger72RT, congrats!!!! :beer:

Gichy, very nice find with those fenders!
1973 Dodge Challenger......................The ongoing project. (00/----\00)
1991 Dodge Stealth R/T Twin-Turbo....The sunny day cruiser (RTBoost)
1990 Toyota Celica GT Liftback...........The new daily & winter driver.
All-American Muscle: 'Cudas and Challengers...Still the Elite and always will be.

                                                                                             
                 
Street_Challenged73 from Wisconsin

Offline challenger72rt

  • Full Member
  • ***
  • Posts: 675
  • My l'il girl w' Dodge hat
Re: Work completed last week
« Reply #5 on: April 18, 2005 - 01:32:58 PM »
Congratulations!!! How's momma doing?  Do we get to see a little baby pic?? 

We love our Harms pistol grip too.  Feels real heavy.  Really nice workmanship.  What kind of finish did you get on the handle? 

Momma is ok, altho she underwent an emergency C-section and she will need some time to heal. 

The grip is in the 'stock' woodgrain (plastic) finish.  Installation was a breeze, and feels SO good in one's hand.  I can't believe the difference it makes in driving the car.

Thanks for the kind words everybody.

As for pics...
"Once upon a time I had a really bad Monday"

Offline Rev-It-Up

  • Global Moderator
  • Permanent Resident
  • *****
  • Posts: 10601
  • Member Since 2/20/02
Re: Work Completed Week Ending 4/17/05
« Reply #6 on: April 18, 2005 - 02:55:34 PM »
Awwwwww!!! She's precious!  C-section babies are just so beautiful...they just come out looking so perfect!  She's adorable.  I bet your a really proud poppa...you ought to be!
Rev-It-Up                                                             Yes, I'm a girl!
                         


Offline AprilsPink72Cuda

  • Global Moderator
  • Resident
  • *****
  • Posts: 4783
  • 1972 'Cuda 340/Wappingers Falls, NY
    • Klondike's Website (Check it out!)
Re: Work Completed Week Ending 4/17/05
« Reply #7 on: April 18, 2005 - 04:01:43 PM »
Congrats!!!!!  Your baby gorl is beautiful.  Tell Mommy that we hope she is feeling back to normal in no time!

Offline whitesatinmopar

  • Sr. Resident
  • ******
  • Posts: 7273
  • Member Since 3/30/02
Re: Work Completed Week Ending 4/17/05
« Reply #8 on: April 18, 2005 - 04:08:13 PM »
Good news on the progress, but Super Congratulations on the new little girl, man that is such a life changing experience, hope your wife is back on her feet before too long to enjoy those first days as a "real" family !   :thumbs: :cool:
1969 Polara 500 vert.
1970 Charger 500
1971 Dart Swinger
1972 R/R 440+6 (wanabe)
1973 Challenger

Offline Robb

  • Sr. Member
  • ****
  • Posts: 1006
  • Member since: March 20, 2003 - 09:52:47 AM
Re: Work Completed Week Ending 4/17/05
« Reply #9 on: April 18, 2005 - 10:37:34 PM »
Nice Work !    (good going on the car too  :grinyes:)


Swapped out the Magnum 500s  for  Rallye wheels this weekend

and while I was in there with the wheels off,  I put new disc brake pads up front and new brake shoes on the rear.
the 275-50s fit nicely back there even though theyre 7" rims.




otherwise I just bought more odds and ends stuff ( Street Dom 440 intake, A/C crankshaft pulley ) 

4 more weeks till the Keisler 5 speed shows up !
« Last Edit: April 18, 2005 - 10:40:08 PM by Robb »

70 Challenger SE  (440 SIX PACK / Keisler 5 speed, R/T SE replication)       68 Sport Satellite Convertible 383 Super Commando / 727  Survivor

2002 Trans AM WS6 convertible:  DD
1999 4Runner 4x4:  lifted-locked-armored  expedition vehicle
1990 Jeep XJ 4x4:  Front Dana 60, GM-14bolt rear, 3 link, 4link, 5.38 detroits, beadlocked 40's, stretched to 110" wb  Rock Crawler

Offline Carlwalski

  • C-C.com Expert
  • ********
  • Posts: 20672
Re: Work Completed Week Ending 4/17/05
« Reply #10 on: April 19, 2005 - 12:22:58 AM »
Looking good everyone, REAL good.  :D ;)


My engine is painted, headers, carb, etc will be on this Thursday and I wil take photos then, then it's up up and away (into the engine bay).

 :drool: :thumbs:
1970 Dodge Challenger R/T
White, License Plate, 0A-5599
540ci Aluminium Hemi, F.A.S.T EFI
TF-727 Gear Vendor OD, Dana 60

Offline 72cuda

  • Jr. Member
  • **
  • Posts: 253
  • mmmmm, boiling gas
Re: Work Completed Week Ending 4/17/05
« Reply #11 on: April 19, 2005 - 10:58:01 AM »
New step-up rods and springs (richer) in the carb. Runs much stronger, but still chasing a mysterious part throttle bog when the engine is hot.
72 Cuda 383 4-spd

Drive it like you paid for it

Offline 4Cruizn

  • Administrator
  • C-C.com Expert
  • *****
  • Posts: 18521
  • HEMI FISH
Re: Work Completed Week Ending 4/17/05
« Reply #12 on: April 19, 2005 - 11:01:51 AM »
Congrats challenger72rt on your adorable little girl!!!  And you named her??  



Well I try to work on the car every day and was hoping to get the convert top installed but the shop d!cked me alittle . . . I had the guy come over and inspect the car.  He told me to get my latches and recievers installed and give him a call. I asked about the boot top and the well liner for the car and he said he could get tht stuff.  So I call the other day and tell him I'm ready and ask if he has the boot and well liner??  He then tells me that I should probably supply those things and to call him when I'm ready!!  :mad:  :mad:  :mad:   So as soon as I hung up, I called and ordered the stuff.  Hopefully be in soon!!  I also sandblasted the bumper brackets and am still waiting for the last one so I can finish up the front.  Finally found some chrome bumper guards for the back bumper and as soon as they arrive I can finish up the back.  Still collecting parts and CP has a few things for me too!  Finally found the proper hood latch so I will be securing that this week too!!  Not much time left til CARLISLE!!   :stomp:   :stomp:
« Last Edit: April 19, 2005 - 07:44:58 PM by 4cruzin »

Offline Rev-It-Up

  • Global Moderator
  • Permanent Resident
  • *****
  • Posts: 10601
  • Member Since 2/20/02
Re: Work Completed Week Ending 4/17/05
« Reply #13 on: April 19, 2005 - 01:06:38 PM »
Not much time left til CARLISLE!!   :stomp:   :stomp:

You feeling the pressure too??!!  4C, what else do you have left after the top and the bumpers are done?  We still have to install exhaust, front grill area, hang doors and hood, vinyl top, glass, trim and take it back to the body shop for buffing....all in 2 months.... :ack:
Rev-It-Up                                                             Yes, I'm a girl!
                         


Offline Street_Challenged73

  • Sr. Resident
  • ******
  • Posts: 8826
  • '73 FC-7 Challenger..Member since October 20, 2002
    • My '73 Challenger Restoration Page
Re: Work Completed Week Ending 4/17/05
« Reply #14 on: April 19, 2005 - 03:08:34 PM »
You feeling the pressure too??!!  4C, what else do you have left after the top and the bumpers are done?  We still have to install exhaust, front grill area, hang doors and hood, vinyl top, glass, trim and take it back to the body shop for buffing....all in 2 months.... :ack:

Awe, c'mon you two.  You know there's plenty of time left to get these cars ready for the show. :thumbs: :grinyes:  When you don't have a car you're planning on bringing it seems like it takes forever for this great event to happen... :'(
1973 Dodge Challenger......................The ongoing project. (00/----\00)
1991 Dodge Stealth R/T Twin-Turbo....The sunny day cruiser (RTBoost)
1990 Toyota Celica GT Liftback...........The new daily & winter driver.
All-American Muscle: 'Cudas and Challengers...Still the Elite and always will be.

                                                                                             
                 
Street_Challenged73 from Wisconsin