cooling parts needed.. AAR

[gleasmja]

I'm looking for a 7 blade fan setup for my 70 AAR if anyone has one, P/N 2863216, clutch also p/n 2806070 and the fan shroud 2998326.


Thanks

Jon

[brotow]

I'm looking for a 7 blade fan setup for my 70 AAR if anyone has one.


Thanks

Jon

This should be the original fan from the 1974 challenger 360 with air.  The clutch will be included with the fan. As for price I don't know what it is worth to ask for a fair price. 
Here is my photobucket link to more pictures of the fan and clutch.  And I can get a measurement if you need it,  You can probably check the part number on it and find the application, size,....

http://s1131.photobucket.com/user/brotow1/library/1974%20challenger%20radiator%20fan

[gleasmja]

thanks, but that's to big for my application.

[gleasmja]

guru's,


Does this look right for a AAR shroud? 

http://www.ebay.com/itm/OEM-Mopar-26-Radiator-Fan-Shroud-B-body-Dodge-Plymouth-Charger-Road-Runner-GTX-/321421567718?pt=Vintage_Car_Truck_Parts_Accessories&hash=item4ad637e6e6&vxp=mtr

[Topcat]

Yes,

26" shroud does all engines from 318 to Hemi.

[anlauto]

  Yup...shroud is the easy (cheap) part of your problem.

[Topcat]

You'll need these as well.

http://www.ebay.com/itm/70-71-A-B-C-E-Body-Cuda-26-OEM-Radiator-Shroud-Bolt-Set-/400709291129?pt=Vintage_Car_Truck_Parts_Accessories&hash=item5d4c228c79#ht_556wt_758


Pull up gently while tightening to make sure fan doesn't hit shroud.
They are very close.

[gleasmja]

Yup...shroud is the easy (cheap) part of your problem.

I'm noticing that!!!!

[Topcat]

The OEM clutch fans can be re built. But at a cost of time.
You're looking at least a 1 year lead time.
It was by a guy named I believe, Fred Oliva in FL.

Tony's Parts sells reproductions.

[gleasmja]

Vintage Automotive Research
2602 NW 94th Ave
Coral Springs Fl.
Just contact Fred Oliva at foliva@gate.net or call him at (954)756-1161


I've found this searching around but it's from 2004, and they said the numbers no good. trying the email now.  Anyone got newer information??


e-mail doesn't work either...?

[Topcat]

Fred was an older (salty) gentleman when I last dealt with him years back.

I also tried finding his contact info and it has gone away.
Might try sending him a letter if the e-mail doesn't work and see if that works?

Scott at Harms Auto is very up on who could be doing fan clutch restorations.
There maybe somebody else who restores these perhaps.

[gleasmja]

another detail question?  Should the fan have the stamped part number or embossed part number?

Thanks

[Topcat]

Fans had a stamped number with a Made in Canada stamping in white ink.

Any luck contacting Fred?

[gleasmja]

No luck contacting Fred.  But my friend tracked me one down at Carlisle.  Stamped part number, but repainted so no stamp.  And a good clutch to boot.

[Topcat]

3462112 is the 71' clutch very close to the 70' 2806070.
Slight differences.