BUILD PARTY - 6/13 through 6/15

[ViperMan]

Alright, I apologize if I'm stepping on anyone's toes here...

This weekend we got to see both 4C and Andy.  Andy mentioned that he's talked to a few members about having a build party next weekend.

I know it's short notice, but it seems like a few people are already planning the trip.  I thought that - if this is the final push - might as well rally the troops.

Andy, I'm sorry if this is premature, or if someone else was taking the torch - if so, let me know and I'll take this down.  But after seeing the car today, dude... ...you're so close.  Let's get 'er done!!!  I logged in tonight and was surprised that it wasn't already mentioned.

Andy lives in Ann Arbor, MI (and I try not to hold that against him!)  I won't give out his address, but if you think you can come by next weekend to lend a hand, try reaching him, myself, or Brad.

Jeff

['Cuda Hunter]

Wish i could join you guys.

Still owe Andy one.

Have a good time! Take some pics please! 

[dfrazz]

Good luck and hope everything goes smoothly so you can get her complete and on the road.  And yes, pics please!   

[blown motor]

Still need a few parts. Drive shaft, distributor (Mopar or Firecore), ECU, voltage regulator,wires. Maybe Dan can complete the list.

[DMZ73]

ViperMan!
I'm in, but have limited availability over the weekend. I will have some time Saturday, and some time Sunday to devote to Andy.

Still trying to track down some parts to make it happen.
I'll definitely bring some beer!
I'll see if I can get an updated list posted.

That engine and front cradle have to get in that car!
We are too close, and a few extra bodies can meke it happen. I don't care if we have to push him down the road!


This is fact..

Engine:
Has a Torque converter 2800
Does not have a flex plate
Bolts to crank- 6-11-14
Bolts to converter 6-11-14
No fuel pump
Fuel supply line-told not to get- JimmyNick?
No Fuel line pump to carb-
Calling Dave tomorrow on the Accelerator linkage(throttle cable)
Carb-yes Serpentine belt set up (ST concepts) ---**does not have belt**
**Getting pulleys from Jerry**
Headers: yes, got 'em
Trans- yes; timing questionable
Driveshaft- no 4C and Brad to bring?
U joints- no
yolk - Brad to bring spare

Cooling system:
Radiator-aftermarket; stock hose locations
Water pump- need a hi volume run in either direction Rad hoses- no
Radiator hoses - no

Ignition system/electrical
Alternator- NipponDenso- need pigtail for NiponDenso
Need battery cables
Has a new engine bay harness
Has chrome ECU, afraid it will burn out
Ballast resistor: 6-11-14
Coil-no
Dizzy-MEK, question on arrival time

Front suspension
Upper control arms yes, got em
Lower control arms yes, got em
Bushings--?? More definition needed
Ball joints yes,got 'em
Pitman arm- yes, got 'em
Drag link ass'y- yes,got em
Camber bolts- yes, got em
K frame bolts - yes, got em
Torsion bars - yes, got em
Steering box- DMZ- has spare, will check spline count.
Steering coupler-???
 ( I think he has it rebuilt)

I'll update more as needed...
contact me directly at 248-709-8273
Dan

[ViperMan]

I'm not the greatest mechanic in the world, but I THINK I saw the rear brakes installed, minus the actual springs/shoes.  I saw the slave cylinders at least.  Might be one thing off the list!!

PS - I've been in touch with Andy today - he's going to try to get a list together of stuff still needed.

I'm wondering if he got the engine pulleys and brackets yet. Last I knew he needed those still.

[dutch]

way cool!  too bad I cant make it      oh well...I`d probably end up breaking stuff anyways 
make it happen guys 

[brads70]

Booked a rental car , leaving Friday morning! 
   Best get the rust off them tools boy! 

[jimynick]

I'm going to try to get away sometime Friday afternoon. Brad, are you and Murray going together? I'll call Murray's cell for directions. Where do we crash? Is there a motel nearby? What do we need for tools, since it sounds like Andy's got quite a few? Ian

[brads70]

I'm going to try to get away sometime Friday afternoon. Brad, are you and Murray going together? I'll call Murray's cell for directions. Where do we crash? Is there a motel nearby? What do we need for tools, since it sounds like Andy's got quite a few? Ian

I rented a car. It was cheaper than driving my work van to Murrays. If you want me to swing by and pick you up I'm game for that? I can leave at anytime? Your in Cambridge right?  If you want to split on a motel I could do that as well?

[BIGSHCLUNK]

Dan, we have an ECU (4pin). See ya'all on saturday

[drewcrane]

This is a great idea, I wish I could help, but Denver is a ways from Michigan, still a great idea wish we had more people here to do that

[Mopar Thunder]

Wish I was closer I'd help out for sure.  My engine is taking a long time but I would give up a weekend to help out. I am hoping to have it finished by the end of June.  If so maybe I'll bring it to Carlisle for a day.

[BIGSHCLUNK]

I keep forgetting to ask.... where's everybody sleeping? Granted my trucks comfortable but are we doing a motel close by? Andys front room?? 

[ViperMan]

When I spoke to Cathy (Andy's wife for those who don't know) this past weekend, she said she was going to put up as many people for each night as possible - even ousting their two sons if needbe!  You guys might be crashing on couches, but you'll have a place to stay.