Author Topic: Start Challenger without dash?  (Read 865 times)

Offline daaboots

  • Jr. Member
  • **
  • Posts: 195
Start Challenger without dash?
« on: June 09, 2014 - 01:24:20 PM »
I have the dash pulled out of my Challenger, but I need to move the car now. Is there any way to start it without putting the dash back in?

Also, does anyone have a good wiring diagram for a 74 Challenger?




Offline Bullitt-

  • Permanent Resident
  • *******
  • Posts: 12167
  • Better Things To Come Member Since 2/16/06
Re: Start Challenger without dash?
« Reply #1 on: June 09, 2014 - 02:52:07 PM »
put a jumper wire from the positive battery terminal to the input side of the ballast resistor, crank motor by shorting terminals on the starter relay.

basic diagrams here  http://www.mymopar.com/index.php?pid=24
Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
Screwed by Photobucket!

Offline anlauto

  • Permanent Resident
  • *******
  • Posts: 12328
  • I'm Alan G...I'm a Mopar Addict
    • Alan Gallant Automotive Restoration
Re: Start Challenger without dash?
« Reply #2 on: June 09, 2014 - 02:56:07 PM »
Check and see if the steering column is still in the car first... :smilielol:
I've taught you everything you know.....but I haven't taught you everything I know !
www.alangallantautomotiverestoration.com

Offline daaboots

  • Jr. Member
  • **
  • Posts: 195
Re: Start Challenger without dash?
« Reply #3 on: June 09, 2014 - 03:53:33 PM »
Thanks Bullitt. And which is the input side?

Yes, the steering wheel and pedals are present  :naughty:

Offline Bullitt-

  • Permanent Resident
  • *******
  • Posts: 12167
  • Better Things To Come Member Since 2/16/06
Re: Start Challenger without dash?
« Reply #4 on: June 09, 2014 - 05:29:07 PM »
Thanks Bullitt. And which is the input side?
   Blue wire.
Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
Screwed by Photobucket!

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Start Challenger without dash?
« Reply #5 on: June 09, 2014 - 06:56:42 PM »
I think you need to connect the red & black ammeter wires together

Challenger - You`ll wish You Hadn`t

Offline Racer57

  • Sr. Member
  • ****
  • Posts: 1489
Re: Start Challenger without dash?
« Reply #6 on: June 09, 2014 - 07:11:32 PM »
I think the only thing you need is to hook the amp wires together.
I think you need to connect the red & black ammeter wires together

Isn't that the only thing you need to do ?