Stock exhaust system pics wanted

[anlauto]

Those are quite different then originals.....in every way...

[burdar]

Go to Dales Cuda Shop. That's where I got mine. It's the two piece style. Originally they were bare metal. The one sold by Dales is zinc plated.

[anlauto]

Originally they were bare metal. The one sold by Dales is zinc plated.

30 seconds in Muratic Acid...and you'd never know

[burdar]

Yep...I thought about it but just left it zinc.

[crash340]

My Cuda only has one of those style of floor brackets only, under the rear left seat, you can just see it in my previous photo's

[mrbill426]

Thanks guys.

How about this hanger bracket, does it look right for a '72?

[burdar]

That's what I'm using on mine.  You should already have holes drilled in the floor behind the rear seat if your car originally used that style.

[CUDA JAS]

That's what I'm using on mine.  You should already have holes drilled in the floor behind the rear seat if your car originally used that style.

I assume these are specific for the left and right side.  I have no brackets on mine.  Can you buy pair?  I have only seen one side at the usual exhaust places.

Jason

[anlauto]

Jason 73-74 E Bodies didn't have the passenger side floor bracket. You need to buy this and weld it on http://www.ebay.com/itm/NEW-1970-74-E-Body-Right-Floor-Pan-Exhaust-Hanger-Bracket-/181556300087?pt=Vintage_Car_Truck_Parts_Accessories&fits=Model%3ACuda&hash=item2a45994937&vxp=mtr#ht_711wt_1026  of course you could drill holes and bolt it on as well.

[CUDA JAS]

Jason 73-74 E Bodies didn't have the passenger side floor bracket. You need to buy this and weld it on http://www.ebay.com/itm/NEW-1970-74-E-Body-Right-Floor-Pan-Exhaust-Hanger-Bracket-/181556300087?pt=Vintage_Car_Truck_Parts_Accessories&fits=Model%3ACuda&hash=item2a45994937&vxp=mtr#ht_711wt_1026  of course you could drill holes and bolt it on as well.

I realize that the brackets would not be correct for my car, but I think that style is the easiest to use when adding stock style exhaust.

Is there any place to get both sides other then ebay??

Jason

[mrbill426]

I believe Accurate Exhaust has them

 

I realize that the brackets would not be correct for my car, but I think that style is the easiest to use when adding stock style exhaust.

Is there any place to get both sides other then ebay??

Jason

[CUDA JAS]

I believe Accurate Exhaust has them

 

Accurate has the driver side, but I do not see one for the passenger side.

Goodmark (I always forget about them) have the passenger side...good price too!

https://www.goodmarkindustries.com/p-7097-bracket-exhaust-pipe-hanger-70-71-e-for-muffler-hanger-2120-517-707.aspx

Jason

[HP_Cuda]

No need for resonators then no need for brackets but I guess I still need:

http://www.classicindustries.com/product/mopar/parts/me5040.html

[HP_Cuda]

I need one of these babies but Goodmark wants to charge 29 bucks shipping for a 19 dollar part???

WTF? 

Accurate has the driver side, but I do not see one for the passenger side.

Goodmark (I always forget about them) have the passenger side...good price too!

https://www.goodmarkindustries.com/p-7097-bracket-exhaust-pipe-hanger-70-71-e-for-muffler-hanger-2120-517-707.aspx

Jason

[mrbill426]

Summit carries them too for $18 & change, and I doubt their shipping is near that much.

I need one of these babies but Goodmark wants to charge 29 bucks shipping for a 19 dollar part???

WTF?